Application:
Options:
Advantages:
An alternative for
Rexroth: A4FM, A10FM;
Linde: HMF-02;
Poclain: M2,M3;
Sauer Danfoss: 90M,40M;
PWG: MF;
Bondioli&Pavesi: HPM7, M8, M4MF;
Eaton: MFX, Series 1;
Technical data
Code |
Capacity cm3/rev [in3/rev] |
Max. speed RPM |
Max. Torgue*** Nm [lb-in] |
Output kW [HP] |
Max. Pressure bar [PSI] |
Max. Oil Flow l/min [GPM] |
|||||
cont. | int.* | cont. |
int.** | cont. |
int.** | cont. |
int.** | cont. | int.* | ||
MAP 52 | 51.95 [3.17] | 3850 | 4330 | 290 [2566] | 347 [3071] | 80 [107] | 120 [161] | 350 [5080] | 420 [6100] | 200 [52.8] | 225 [59.4] |
MAP 58 | 58.8 [3.59] | 3398 | 3823 | 320 [2832] | 375 [3320] | 80 [107] | 120 [161] | 340 [4930] | 400 [5800] | 200 [52.8] | 225 [59.4] |
MAP 62 | 62.4 [3.81] | 3050 | 3500 | 318 [2814] | 377 [3337] | 80 [107] | 120 [161] | 320 [4640] | 380 [5510] | 190 [50] | 215 [56.8] |
Peak pressure is the highest allowable pressure, may occur for max. 1% of every minute; * Intermittent speed (flow): for pressure up to 150[2200] bar[PSI]; ** Intermittent load: the permissible values may occur for max. 10% of motor lifetime; *** Theoretical torque; **** The calculated max values are based on the optimal direction of the forces Fr, Fa and optimal position of the shaft. ***** The constant values are used for calculation of torque and speed with motor efficiencies =0.95 and =0.9. |
|||||||||||
Min. Speed | RPM | 500 | |||||||||
Max. Pressure in Drain Line | bar [PSI] | 5 [70] | |||||||||
Pressure fluid | Mineral based - HLP(DIN 51524) ot HM(ISO 6743/4) | ||||||||||
Temperature range | °C [°F] |
-40+82 [-40+180] | |||||||||
Optimal Viscosity range | cSt [SUS] | 12+68 [70+320] | |||||||||
Filtration | ISO code 18/16/13 (Min. recommended fluid filtration of 10 micron) |